Filter
Top Products
SELECTING/EDITING/SAVING PATTERNS
—
——————————————————————————————————————————————————————
——
154
5
Wind the card reader cable around the
hooks on the back of the operation panel,
and then plug the card reader cable into the
USB port.
• The touch pen can be stored in the touch
pen holder on the card reader holder.
1 Touch pen
2 Touch pen holder
3 USB port
4 Hooks
Memo
● For details on recalling an embroidery
pattern from an embroidery card, refer to
“About embroidery cards (optional)” on
page 152 and “Using embroidery card
reader without the card reader holder” on
page 155.
■ Removing the embroidery card reader from the
machine
1
Remove the card reader cable from the
hooks on the operation panel.
1 Hooks
2 Cable
2
While pressing in the tab on the card reader
holder with your finger, pull the card reader
holder up to remove it from the operation
panel.
1 Tab
3
Remove the embroidery card reader and
touch pen from the card reader holder. If
desired, store the touch pen in the touch pen
holder on the operation panel.