Brother 884-T05 Sewing Machine User Manual


 
SELECTING/EDITING/SAVING PATTERNS
——————————————————————————————————————————————————————
——
166
Rotating a pattern
The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
1
Touch .
X The screen shown below appears.
2
Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1 Shows the angle of the pattern after a key is
touched to change it.
To return the pattern to its original angle,
touch .
3
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 163.
4
After making the desired changes, touch
.
X The pattern editing screen appears again.
CAUTION
Memo
If in the embroidering settings screen
is used, the entire combined pattern can
be rotated. (For details, refer to “Rotating
the entire pattern” on page 181.)
If the pattern is too large or the pattern is
too close to the edge of the embroidery
field, all of the rotating options may not
apply.
Example: Original angle
1 Rotates 90 degrees to the right
2 Rotates 90 degrees to the left
3 Rotates 10 degrees to the left
4 Rotates 10 degrees to the right
5 Rotates 1 degree to the left
6 Rotates 1 degree to the right
7 Moves the pattern in the direction of the arrow
on the key.
8 Touch this key to close this screen.
9 Touch this key to return the pattern to its
original angle.
6
2
7
9
8
4
5
1
3
After changing the angle of the pattern,
check the icons for the embroidery
frames that can be used and use only
the indicated frames. If a frame other
than those indicated are used, the
presser foot may hit the embroidery
frame and cause injuries.
1