Filter
Top Products
32
EMBROIDERING TUTORIAL
—
———————————————————————————————————————————————————————————————
——
Operating Precautions
The necessary points to ensure the correct operation of this machine are described below.
Power supply precautions
Be sure to observe the following precautions concerning the power supply.
WARNING
CAUTION
● Use only regular household electricity for the power source. Using other power sources
may result in fire, electric shock, or damage to the machine.
● Make sure that the plugs on the power supply cord are firmly inserted into the electrical
outlet and the power supply cord receptacle on the machine.
● Do not insert the plug on the power supply cord into an electrical outlet that is in poor
condition.
● If any of the following occur, turn off the embroidery machine and unplug the power
supply cord, otherwise a fire, an electric shock or damage to the machine may result.
• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine is being operated.
• If the machine is not operating properly, for example, when there is a loose or cut con-
nection.
• During electrical storms.
● Use only the power supply cord included with this machine.
● Do not plug this machine in with extension cords or multi-plug adapters with many other
appliances plugged into them, otherwise a fire or an electric shock may result.
● Do not plug in or unplug the power supply cord with wet hands, otherwise an electric
shock may result.
● When unplugging the power supply cord, be sure to first turn off the machine, and then
grasp the plug when unplugging the cord. Pulling on the cord may damage it or result in a
fire or an electric shock.
● Do not allow the power supply cord to be cut, damaged, modified, forcefully bent, pulled,
twisted, or bundled. In addition, do not place heavy objects on the cord or expose it to
heat, otherwise damage to the cord, fire or an electric shock may result. If the power
supply cord or its plug is damaged, stop using the machine, and then take the machine to
your authorized dealer for repairs before continuing use.
● If the machine is not to be used for a long period of time, unplug the power supply cord,
otherwise a fire may result.
● When leaving the machine unattended, either the main switch of the machine should be
turned to OFF or the plug must be removed from the socket-outlet.
● When servicing the machine or when removing covers, the machine must be unplugged.
● For U.S.A only
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of
electrical shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify the plug in any way.