Filter
Top Products
EMBROIDERING SETTINGS
—
———————————————————————————————————————————————————————————————
——
132
Reserved Needle Bar Settings
Normally, the machine automatically assigns thread colors to the needle bars; however, a specific thread
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is
removed from the machine’s automatic assignments and the specified color remains assigned to it.
By specifically assigning often used thread colors to certain needle bars, the trouble of changing the thread
spools can be reduced.
Note
● This feature is not accessible through the embroidering screen.
Once a manual needle bar setting is specified, it
remains applied until the setting is cancelled.
The manual needle bar settings can be specified in
page 3/5 of the settings screen.
1
Touch , and then touch and
to display page 3/5 of the settings
screen.
2
Touch , , , , or for the
number of the needle bar that you wish to
specify.
1 Indicates the number of the selected needle bar
3
Select the color to be assigned to the needle
bar.
Touch , , and until the color
that you wish to select from the thread table
appears enlarged.
1 The color that appears enlarged is the color that
is selected.
2 Displays the color that is selected and its name
X Highlighting a color square moves in the
direction of the arrow on the key that is
touched.
1
2
1