Filter
Top Products
SELECTING/EDITING/SAVING PATTERNS
—
——————————————————————————————————————————————————————
——
188
1 Shows the amount of memory used by selected
pattern.
2 Shows the amount of free space in the
machine’s memory.
3 Touch this key to delete the selected pattern.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
3
Touch .
X The screen shown below appears.
4
To delete the data, touch .
X The pattern is deleted, and if there is
enough space, the previous screen
appears automatically.
• To quit deleting, touch .
5
If there is not enough space, delete another
pattern.
X If the embroidery data was saved
successfully, the previous screen
automatically appears.
• Saving the data takes approximately 10
seconds.
Note
● Do not turn off the machine while the
“Saving” message is displayed, otherwise
the pattern data being saved may be lost.
■ Recalling stored patterns
Refer to the appropriate page of “Selecting an
Embroidery Pattern” according to the media
being used. For patterns saved on the machine,
refer to page 151. For patterns saved on USB
media, refer to page 160.
3 2
1