Filter
Top Products
16.3 C1651 Clock Module PCB Features
Figure 14 llustrates the PCB features referred to elsewhere in the documentation
LK1 – Select
operating
d
DIL switch S1 -
Select config mode,
reset/disable counter
Figure 14 – C1651 Clock Module PCB
16.4 Clock Module Error Messages
16.4.1 WP DIL Switch Error Message:
WP DIL Switch is operated when the timer is not in Timer Set Mode, the normal display flashes
with WP DIL switch message:
HH:MM:SS
D/N ON
or
HH:MM:SS
D/N OFF
Changes to (pulses every second):
WP DILSW
IS ON
The backlight remains OFF. The panel indicates a general fault and prevents the clock module
from being accessed by the user/engineer.
16.4.2 EEPROM Error Message:
Data inconsistency has been detected in EEPROM0 or EEPROM1:
Page 37 of 40