Filter
Top Products
HH:MM:SS
OFF Time
MM
flashing
o Press ENABLE (+) or DISABLE (-) to adjust the minutes (MM) to the desired
value (0-59).
o Press SELECT ↓ to access select the seconds:
HH:MM:SS
OFF Time
SS
flashing
o Press ENABLE (+) or DISABLE (-) to adjust the seconds (SS) to the desired
value (0-59).
o Press SELECT ↓ to exit to the Delay On/Off Set Display:
D/N ON
Change?
D/N OFF
Change?
Pressing SELECT ↓ repeates the cursor/display changes as above.
Pressing SELECT ↑ repeates the cursor/display changes as above in reverse.
• To exit Clock Module Menu:
o Return the WP DIL switch on the Clock Module to OFF position.
o Press SELECT ON/OFF: Module switches off the LCD backlight and exits
configuration mode. The normal time display is:
HH:MM:SS
D/N ON
or
HH:MM:SS
D/N OFF
o On completion of editing, return the Access Control key switch to position “0”.
Page 35 of 40