Bosch Appliances D623 Home Security System User Manual


 
D623 Series/D625 Series | User's Guide | Auto-Forward Off Setup (Cmd 84)
30 Bosch Security Systems | 9/04 | 46841E
Auto-Forward Off Setup
(Cmd 84)
I can perform this command.
I cannot perform this command.
Use this command to program the auto-forward off
sequence that cancels the redirecting of all incoming
calls to another telephone number when you turn the
system off.
1. Press [CMD] [8] [4]. The keypad may prompt you
to enter a valid passcode.
2. Enter your passcode if necessary. The keypad
display scrolls:
Auto-Forward Off
setup mode.
Enter digits for
Auto-Forward Off
For ‘pause’ (P),
press All On.
For ‘flash’ (F)
press Part On.
A and C keys
move cursor.
To delete digit,
Press B key.
To view and edit
press Bypass.
To stop edit,
Press Bypass.
To exit,
Hold Cmd.
3. Enter the auto-forward off sequence to redirect all
incoming calls.
4. Press and hold [CMD] to exit this command.
Auto-Forward On/Off (Cmd 82)
I can perform this command.
I cannot perform this command.
Use this command to turn the auto-forward feature on
or off as necessary.
1. Press [CMD] [8] [2]. The keypad may prompt you
to enter a valid passcode.
2. Enter your passcode if necessary. The keypad
displays the current status and the available
options.
Program the Auto-Forward feature by pressing [1]
to turn Auto-Forward On, or [2] to turn Auto-
Forward Off. For example, if Auto-Forward is On,
press [2] to turn it Off.
3. To exit this function, press [CMD].