Filter
Top Products
D623 Series/D625 Series | User's Guide | Turn the System Part On (Part On or Cmd 2)
.
Bosch Security Systems | 9/04 | 46841E 11
3. Enter your passcode if necessary. Exit delay time
begins. The On indicator turns on. Exit the
building now.
60 seconds to
All On.
Enter your passcode to stop the system from
turning on during the exit delay.
Press [BYPASS] to bypass points (see Bypass
Points on page 18). You can turn the system All
On with No Delay by pressing [NO DELAY]. You
can also turn the system Part On by pressing
[PART ON]. The system prompts you through this
procedure.
To bypass points
Press Bypass
For no delay
press No Delay
For Part On
press Part On
4. During the last 10 sec. of Exit Delay, the keypad
displays Do not exit! and emits a double tone
every second to warn you not to exit and to turn
the system off. The system turns All On. The On
indicator remains on steady.
Smiths Residence
All On
5. To turn the system off, enter your passcode.
Turn the System Part On (Part
On or Cmd 2)
Exit Delay Time (to be filled in by your security
company).
You have __________ sec. to exit premises before
system turns on.
I can perform this command.
I cannot perform this command.
Part On turns on only part of your system, leaving the
rest of the system turned off.
If your keypad shows OK for Part On or OK for All
On, this means all of the points that turn on for Part
On operation are normal (such as all protected doors
and windows bing closed).
Smiths Residence
Ok for Part On
Once you press the [PART ON] key, exit delay begins.
Use Part On when you want part of your system turned
on. For example, use Part On if you plan to stay inside
the premises and you only want to protect the
perimeter doors, or you are leaving and you want a pet
to move freely about inside without causing an alarm.
1. Make sure that Part points are normal (not faulted).
If your system has faulted points, return them to
normal, or bypass them.
2. Press [PART ON]. The keypad may prompt you to
enter a valid passcode.
3. Enter your passcode if necessary. The On indicator
turns on and Exit delay time begins. The keypad
display scrolls the following:
60 seconds to
Part On.
To bypass points
Press Bypass.
For no delay
Press No Delay.
For All On
press All On
48 seconds to
Part On.
Enter your passcode to stop the system from
turning on during the exit delay. You can turn the
system Part On with No Delay by pressing [NO
DELAY]. Or you can bypass points by pressing
[BYPASS].