Filter
Top Products
D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52)
.
Bosch Security Systems | 9/04 | 46841E 27
Off Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the system
off. Press the number key of the sked you want to
change followed by [*].
Sk# A# Off
Time ##:##
Sk# A#
Days
12345678
SMTWRFSA
6. Enter the time for the system to automatically turn
off (HH:MM). In this example, program Sked 4 in
Area 3 to turn off at 7:00 a.m.
Sk4 A3 Off
Time 07:00
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk4 A3
Days
12345678
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk4 A3
Days
12345678
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk4 A3
Days
12345678
--TWRFS-
10. Press [CMD] when you are done changing the
sked.
Output On Skeds
This section is intended for turning
outputs on.
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1
to 4.
5. The keypad scrolls all skeds that turn the outputs
on. Press the number key of the sked you want to
change followed by [*].
Sk# Output ## On
Time ##:##
Sk#
Days
12345678
SMTWRFSA
6. Enter the time for the system to automatically
operate Output 01 (HH:MM). In this example,
Sked 5 is set for 12:00 a.m.
Sk5 Output 1 On
Time 24:00
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk5
Days
12345678
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk5
Days
12345678
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk5
Days
12345678
--TWRFS-
10. Press [CMD] if you are done changing the sked.
Output Off Skeds
This section is intended for turning
outputs off.
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the outputs
off. Press the number key of the sked you want to
change followed by [*].
Sk# Output ## Off
Time ##:##
Sk#
Days
12345678
SMTWRFSA
6. Enter the time for the system to automatically
operate Output 01 (HH:MM). In this example,
Sked 5 is set for 1:00 a.m.
Sk6 Output 1 Off
Time 24:00
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk6
Days
12345678
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk6
Days
12345678
-MTWRFS-