Filter
Top Products
D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52)
26 Bosch Security Systems | 9/04 | 46841E
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk2 A1
Days
12345678
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7] .
Sk2 A1
Days
12345678
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk2 A1
Days
12345678
--TWRFS-
10. Press [CMD] when you are done changing the
sked.
Part 2 On Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the system
Part 2 On. Press the number key of the sked you
want to change followed by [*].
Sk# A# Part On
Time ##:##
Sk# A#
Days
12345678
SMTWRFSA
6. Enter the time for the system to automatically turn
Part 2 On (HH:MM). In this example, program
Sked 3 in Area 2 for 7:30 p.m.
Sk3 A2 Part On
Time 19:30
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk3 A2
Days
12345678
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk3 A2
Days
12345678
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk3 A2
Days
12345678
--TWRFS-
10. Press [CMD] when you are done changing the
sked.