Filter
Top Products
1999 BERNINA Of America
Section E - page 12
CHAINSTICH SEAM
Instruction Manual pg.
_____
Feet-ures Unit____pg.____
____
•Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference card. Insert the
Right Needle and turn the Stitch Selection Dial to “G”.
•Set Stitch Length at 3.
•Following the instructions on page ___ of your Instruction Manual, thread the
serger for a Chain Stitch.
• With right sides together place the fabric under the Needles. Use the
5
/
8
” mark
on the Cover/Chain Stitch Extension Plate to position the fabric.
• Chain Stitch the fabrics together. Continue stitching off the end of the fabric.
•Following the directions on page ___ of the Instruction Manual, remove the chain
stitch.
• Lift the toe of the Presser Foot and Chain Stitch the seam a second time.
•Following the directions on page___ in the Instruction manual, secure the thread
tail.
•Trim and mount the sample.
FABRIC: 2 pieces of medium weight cotton 1½” X 6”
NEEDLES: 80/12 universal
THREAD: 2 cones of serger thread
PRESSER FOOT: Cover Stitch or Standard