Filter
Top Products
1999 BERNINA Of America
Section C - page 18
C
ORDING
F
OOT
BIAS RUFFLE
Feet-ures Unit
___pg___
Bernette Advanced Guide Workbook
pg.___
Instruction Manual for Cording Foot
•Thread the serger for a 3-thread Overlock stitch using the Center Needle.
Use the Woolly Nylon in the Upper Looper.
•Turn the Stitch Selection Dial to “C” on the Stitch Display Panel.
•Adjust the Stitch Length to 1.75
•Pull the Stitch Selection Lever/Rolled Hem towards you.
•Cutting Width should be at 2 (normal).
•Attach the Cording Foot.
•Raise the Presser Foot and swing it to the left.
•Following the direction in the Instruction Manual for Cording Foot, insert the
nylon fishing line through the Cord Guide.
•Return the Presser Foot to normal sewing position.
•Place the fabric under the Presser Foot and serge along one 8” edge stretching
the fabric edge as you sew.
•Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away
from you). Return Stitch Length to normal.
•Trim and mount the sample.
FABRIC: Medium weight woven cotton 3” X 8” cut on the bias
NEEDLES: 80/12 Universal
THREAD: 2 cones of serger thread (Needle and Lower Looper)
1 cone of Woolly Nylon (Upper Looper)
Nylon fishing line 20 lb. test
PRESSER FOOT: Cording Foot