Filter
Top Products
1999 BERNINA Of America
Section D - page 5
2-THREAD FLATLOCK
Instruction Manual
pg.___
Bernette Advanced Guide Workbook Supplement I
pg.___
Feet-ures Unit
___pg.___
Serger Library – Tips and Tricks
Specialty Stitches
Simply Serging
•Attach the Upper Looper Converter.
•Turn the Stitch Selection Dial to “E”.
•Following the instructions on page ___ of the Instruction Manual thread the
serger for a 2-thread Flatlock Stitch using the Left Needle. Use Jeans Stitch
in the Lower Looper.
•Adjust Stitch Length for 2.5.
•Attach the Right Hand Seam Guide and position the guide halfway between the
Left Needle and the Stitch Finger.
•Fold the fabric in half to 2” X 6”.
•Place the fabric under the Presser Foot and against the Right Hand Seam Guide.
•Serge along the fold. The Looper threads should loop off the edge of the fold.
•Pull the fabric flat. If the fabric doesn’t lay flat, move the guide closer to the
Left Needle and try again.
•Press, trim and mount the sample.
FABRIC: Medium weight cotton 4” X 6”
NEEDLES: 80/12 Universal
THREAD: 1 cone of serger thread (Needle)
1 cone Jeans Stitch (Lower Looper)
PRESSER FOOT: Standard