Filter
Top Products
1999 BERNINA Of America
Section E - page 10
NARROW 2.5mm COVER STITCH
A
TTACHING
L
ACE
Instruction Manual
pg.___
Feet-ures Unit
___pg.___
•Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference card. Insert the
Center and Right Needles and turn the Stitch Selection Dial to “F”.
•Following the instructions on page ___ of your Instruction Manual, thread the
serger for a 3-Thread narrow (2.5mm) Cover Stitch.
• Use a Fabric Stiffener or Spray Starch to stabilize the fabric and lace.
•Position the lace on the right side of the fabric with the scalloped edge of the
lace even with the right edge of the fabric.
•Place fabric and lace under the Needles with the lace header positioned even
with the inside edge of the Left Floating Toe.
• Cover Stitch the lace to the fabric stopping with the Needles in the fabric.
•Turn the Handwheel away form you to raise the Needles to their highest position.
•Lift the Presser Foot and remove the fabric from under the Presser Foot.
•Trim the fabric from beneath the lace and mount the sample.
FABRIC: Medium weight woven cotton 3” X 6”
8” of 1” wide edging lace
NEEDLES: 80/12 Universal
THREAD: 3 cones of serger thread
PRESSER FOOT: Cover Stitch