Filter
Top Products
1999 BERNINA Of America
Section C - page 12
TURNING TUBES
Feet-ures Unit
____pg.________
Bernette Advanced Guide Workbook pg
.____
Serger Library – Tips and Tricks
•Thread the serger for a 3-thread Overlock stitch using
the Center Needle.
•Turn the Stitch Selection Dial to “A” on the Stitch
Display Panel.
•Adjust Stitch Length to 2.
•Serge a Thread Chain several inches longer than the
fabric.
•Fold the fabric, right sides together) to 1” X 6” encasing
the Thread Chain against the fold.
•With the folded edge aligned with the left edge of the
Presser Foot, serge the tube being careful not to catch
the Thread Chain in the stitching.
•After stitching the tube, gently pull on the Thread Chain
and turn the tube right side out.
•Mount the sample.
FABRIC: Tricot 2” X 6”
NEEDLES: 75 Stretch or Ballpoint
THREAD: 3 cones of Metrolene serger thread
PRESSER FOOT: Standard