Filter
Top Products
1999 BERNINA Of America
Section C - page 16
BLIND STITCH FOOT
LACE TO LACE
Feet-ures Unit
____pg._________
Instruction Manual for the Blind Stitch Attachment
Bernette Advanced Guide Workbook
pg.____
Serger Library – Simply Serging
•Thread the serger for a 3-thread Overlock stitch using the Center Needle.
•Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
•Pull the Stitch Selection Lever/Rolled Hem towards you.
•Adjust the Stitch Length to 1.5.
•Loosen the Center Needle tension slightly.
•Attach the Blind Stitch Foot.
•Move the Fabric Guide just to the right of the Right Needle.
•Stiffen the lace with Spray Starch or a Fabric Stiffener.
•With right sides together place the header of the laces under the Presser
Foot and butted up against the Fabric Guide.
•Serge the laces together.
•Gently pull the lace flat and press.
•Trim and mount the sample.
FABRIC: 2 pieces of flat edging lace 6” long
NEEDLES: 70/10 Sharp or Microtex
THREAD: 3 cones of Isacord
PRESSER FOOT: Blind Stitch Foot