An Overview of the FP35 5
Video Connects to an external monitor (optional).
Earphone Connects an insert earphone to the FP35 in order to perform
RECD or audiometric measurements. It can also be used to
connect a Telewand or telecoil board for telecoil measurements.
Speaker Connects an external sound field speaker or external sound
chamber to the FP35 analyzer. Can also be used to connect an
external telecoil board or Telewand (new rear panel only)
Contrast Changes the contrast of the LCD display.
RS232 Connects to a computer in order to run a computer program or
to upgrade your software.
Printer Connects the FP35 to an external printer.
Keyboard This connector has no function (only found on old rear panel
layout)
Power Connects the FP35 to its power supply. We recommend that
you attach the power supply to the FP35 before plugging it
into the wall.
The following symbols can be found on the back and on the bottom of the FP35:
Meaning of Symbols
Read the accompanying documents. Please read this manual
before operating the FP35. A separate maintenance manual
exists for the FP35. If you wish to obtain a maintenance man-
ual please contact Frye Electronics, Inc., or your Frye represen-
tative.
For purposes of safety classification under IEC 60601-1, the
FP35 is class 1 equipment, Type B.
This symbol indicates that Frye Electronics conforms to the
Medical Device Directive 93/42/EEC. If an external printer is used,
it should also have a CE mark for the FP35 to remain compliant.
1.2.4 Sound Chamber Connectors
There are two jacks in the sound chamber. The jack at the bottom of the cham-
ber is for the microphones, and the jack at the top of the chamber is for the
internal speaker.
