Teledyne 6600 Water System User Manual


 
Part I: 1-3
Oil in Water Analyzer Part I: Control Section
Teledyne Analytical Instruments
1.4.1 UP/DOWN Switch
The UP/DOWN switch is used to select between any subfunctions displayed
on the VFD screen such as in the main menue, the system menue, the Alarm
menue, etc. When modifiable values are displayed on the VFD, the UP/DOWN
switch can be used to increment or decrement the values.
1.4.2 ESCAPE/ENTER Switch
The ESCAPE/ENTER switch is used to input the data, to enter a function,
or to exit a function displayed in the alphanumeric display:
Escape Moves VFD display back to the previous screen in a
series. If none remains, returns to Analyze mode screen.
Enter Within a menue: the funtion selected is entered moving on
to the next screen in a series.
With Value selected: Enters the value into the analyzer as
data. Advances cursor on VFD to the next operation.
In the Analyze mode: it calls the main menue. Functions
called out by the main menue:
-System This function is a menu that calls a number
of functions that regulate the analyzer
operation.
-Span This function spans the instrument.
-Zero This function zeros the instrument.
-Alarms This functions sets the alarm preferences.
-Range This function selects whether analyzer is
autoranging or locked on one range.
-Standby Places the analyzer in a sleep mode.
WARNING:
The power cable must be disconnected to fully remove power
from the instrument.