Filter
Top Products
Overedg e Stitch
Stitch selector: 1
Stitch width: 3 to 6.5
Stitch length: 1 to 3
Needle thread tension: 3 to 8
Presser foot A: Zigzag foot
Presser foot C: Overedge foot
NOTE: 1
Set the stitch width 5.0 to 6.5 when the overedge foot C is/
used to prevent needle breakage or damaging the foot. 1
This stitch is often used as a seam finish to prevent fraying.
If using a zigzag foot, start overedging with the leftmost
needle position about 1/8" (0.3 cm) from the raw edge of a
seam. The right tip of the stitch should just clear the seam
edge.
For lightweight fabrics, use the overedge foot. To sew, line
the fabric edge up with the inner side of the brush holder
seam guide.
S
Straig h t Stretch
Stitch selector:
Stitch width:
Stitch length:
Needle thread tension:
Presser foot A:
Presser foot H (option):
6to8
6.5
S.S (Stretch stitch position)
2to6
Zigzag foot (,,,,,,,,,,,)
Straight stitch foot (only)
f
NOTE:
When using the straight stitch foot, make sure to set the
stitch width control at 0. Otherwise the needle may strike
the presser foot and possibly break.
This strong, durable stitch is recommended where both
elasticity and strength are necessary in order to insure
comfort and durability.
® ®
®
or
o
ou
III LII III
III III III
III III III
III III III
WIDTH [_ (_)
LENGTH _ (_
® ® ®
or
0
OU
J
/
/
38