Filter
Top Products
Rep lacement Bobbins
Only use bobbins purchased through Sears Stores, stock
No. 6870 or Sears Service Centers, Parts No. 102869107.
S
Bobbin Winding
• Removing the hook cover plate
Hook cover plate release button
Hook cover plate
Slide the hook cover plate release button _ to the right,
and remove the hook cover plate _.
• Horizontal spool pin
Spool pin
Large spool holder
Small spool holder
Lift up the spool pin _. Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder _, and press it firmly
against the spool of thread.
The small spool holder _ is used with narrow or small
spools of thread.
f
\
\
\\
\
J
Y
• Additional spool pin
Additional spool pin
Spool pin hole
Spool pin felt
The additional spool pin _ is for bobbin winding without
unthreading the machine and for twin needle sewing.
Insert the additional spool pin _ in the hole _.
Place the felt _ and a spool on the pin.
J
J
14