Filter
Top Products
Stitch Length Control
( howto adj ust the stitche length)
Turn the stitch length control until the desired number is
shown at the indicating mark.
(Set the stitch length control ar S.S. when using the stretch
stitch.) The larger the number, the greater the stitch length.
_._==_,',_mark shows the adjustment range when sewing the
buttonhole.
* Raise the presser foot before turning the stitch length
control.
Indicating mark
S
Adj usting Stretch Stitch Balance
Ifstretch stitch patterns are uneven when you sew on a
particular fabric, adjust them with the feed balancing dial.
To adjust distorted patterns.
If patterns are drawn out, correct by turning the dial in
the direction of "-".
If patterns are compressed, correct by turning the dial
in the direction of"+".
Reverse Stitch Control
Sewing wilt be made in reverse while the reverse stitch
control is pressed.
S
J
J
J
28