Filter
Top Products
46
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
2) FX3G/FX3GC PLCs
*1. In the case of FX
3GC PLC, select "FX3G" as the PLC type.
*2. These programming tools are not applicable to FX
3G/FX3GC PLCs. The initial values in FX1N PLC are shown
above.
*3. Parameter values can not be changed by the GT1020 and GT1030.
*4. Parameter values can be changed only by the F940WGOT, F94GOT and F94 handy GOT.
Item
GX Works2
Initial value
GX Developer
Initial value
*1
Setting
range
Programming tool Display unit
FX-30P
FX-10P
(-E)
*2
FX-20P
(-E)
*2
FX-PCS/
WIN(-E)
*2
GOT
1000
*3
GOT-F900
Series
*2*4
Memory
capacity
Program capacity
(steps)
8000 8000
Refer to
Subsection
2.7.3.
8000 2000 8000 8000 8000
Comment capacity
(blocks)
0 0 000––
File register capacity
(blocks)
0 0 00000
Positioning
instruction setting
Not used Not used – – – – –
Program title
Not
registered
Not
registered
Refer to
Subsection
2.7.1.
––
Not
registered
––
Entry code
Not
registered
Not
registered
Not
registered
Not
registered
Not
registered
––
Battery mode OFF OFF No – OFF – –
Modem initialization Not set Not set NONE – Not set – –
RUN terminal input OFF OFF INVALID Not used
Not used
(X0)
OFF –
Serial port operation setting Not set Not set No – Not set – –