Filter
Top Products
293
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
11 Rotation and Shift Operation – FNC 30 to FNC 39
11.1 FNC 30 – ROR / Rotation Right
11
FNC30-FNC39
Rotation and
Shift
12
FNC40-FNC49
Data Operation
13
FNC50-FNC59
High-Speed
Processing
14
FMC60-FNC69
Handy
Instruction
15
FNC70-FNC79
External FX I/O
Device
16
FNC80-FNC89
External FX
Device
17
FNC100-FNC109
Data
Transfer 2
18
FNC110-FNC139
Floating Point
19
FNC140-FNC149
Data
Operation 2
20
FNC150-FNC159
Positioning
Control
11.1 FNC 30 – ROR / Rotation Right
Outline
This instruction shifts and rotates the bit information rightward by the specified number of bits without the carry flag.
1. Instruction format
2. Set data
*1. Do not set a negative value to the number of bits to be rotated.
3. Applicable devices
S1: In 16-bit operations, K4Y, K4M and K4S are valid.
In 32-bit operations, K8Y, K8M and K8S are valid.
S2: This function is supported only in FX
3G/FX3GC/FX3U/FX3UC PLCs.
S3: This function is supported only in FX
3U/FX
3UC
PLCs.
Explanation of function and operation
1. 16-bit operation (ROR and RORP)
"n" bits out of 16 bits of are rotated rightward.
• The final bit is stored in the carry flag (M8022).
• In a device with digit specification, K4 (16-bit instruction) is valid.
Operand Type Description Data Type
Word device number storing data to be rotated rightward 16- or 32-bit binary
n
Number of bits to be rotated
[n ≤ 16 (16-bit instruction), n ≤ 32 (32-bit instruction)]
*1
16- or 32-bit binary
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD
.b
KnX KnY KnM KnS T C D R U\G VZModifyKH E ""P
S1 S1 S1
S2 S3
n
S2
P
FNC 30
ROR
D
16-bit Instruction
5 steps
Mnemonic Operation Condition
Continuous
Operation
Pulse (Single)
Operation
ROR
RORP
DROR
DRORP
Mnemonic Operation Condition
32-bit Instruction
9 steps
Continuous
Operation
Pulse (Single)
Operation
D
D
D
Command
input
FNC 30
RORP
nD
0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0
Carry flag
M8022
High order Low order
b15b14b13b12b11b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Before shift
b3 to b0
Before shift
b15 to b4
After the
instruction
is executed
once
High order
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Low order
M8022
"n" bits (in the case of K4)
b15b14b13b12b11b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Before
execution
After
execution
Rightward
rotation
"n" bits
The status of the bit "n
−
1" is
copied.
Carry flag
"n
−
1" bits
b0 to b3 (n
−
1) are moved.
The contents of
b3 are stored.