Filter
Top Products
ARENA / RANGER USER GUIDE
EN2Z-0906GE51 R0708 94
In the settings list, you can do the following:
• Enter an alias name for a setting.
Please refer to the “Enter Alias Name for Setting” section.
• Modify the current setting value.
Please refer to the “Modify Setting Value” section.
• Upload Parameter Text List…
Please refer to the “Upload Parameter Text List” section.
• View and change Setting properties.
Please refer to the “View/Change Settings Properties” section.
• Print Settings list.
Please refer to the “Print Settings List” section.
• Display particular settings by applying a filter as described under “Apply Filter for
Display” section.
• Configure the list display.
Please refer to “List Display Configuration” in the “Basic Functions” section.
Show Settings List
1. In the tree, click the level (site, plant, controller, etc.) for which you want to
display settings.
2. On the right pane, click Settings tab.
The Settings list is displayed. For description of the properties displayed as
columns, please refer to the “Overview” section.
3. To display certain settings, apply a filter as described under “Apply Filter for
Display” in the “Basic Functions” section.
4. To enter an alias name for a setting group or a single setting, please refer to the
“Enter Alias Name for Settings Group/Single Setting” section.
5. To modify the current setting value, please refer to the “Modify Setting Value”
section.
6. To upload a parameter text list, please refer to the “Upload Parameter Text List”
section.
7. To view and change settings properties, please refer to the “View/Change
Settings Properties” section.
8. To print a settings list, please refer to the “Print Settings List” section.