Filter
Top Products
ARENA / RANGER USER GUIDE
EN2Z-0906GE51 R0708 72
4. In the Print dialog box, select the printer and desired options and click Print.
ALARMS
Overview
Multi Site Alarming Support On a supervisor ARENA, alarms can be collected centrally from all sites.
Manual Alarm Clearing The user can “artificially” create a going alarm for a selected coming alarm. If the
user knows for sure that an alarm is gone, he can clear it.
Determine Alarm Reason You can navigate directly to the alarm source.
Link to the Alarm Destination Support of different dialling destinations
It is sufficient that a remote site without ARENA dials to one destination central, a
so-called “relay central”.
Support of alarm routing for application and system alarms (=point alarms)
The remote site routes system alarms and application alarms to different
destinations. The selection of application alarms is done based on the datapoint
name (=user address). This feature is supported indirectly through a relay ARENA
using the alarm forwarding feature of ARENA. This means: A remote site always
dials out to the same ARENA, regardless of the alarm cause. This ARENA acts as
relay for further alarm segregation.
Alarm Display Alarms can be seen on any level (Site, System, Plant, etc.). Depending on the level,
the alarm list display differs in the number and kind of columns (alarm properties).
Depending on the selected level, an alarm can feature at maximum the following
properties displayed as columns in the list: