Filter
Top Products
ARENA / RANGER USER GUIDE
EN2Z-0906GE51 R0708 106
2. Click Edit Datapoints. The Edit Datapoints dialog box displays.
3. In Default Occupied Value, enter the value in degrees Celsius for the occupied
state.
4. In Default Unoccupied Value, enter the value in degrees Celsius for the
unoccupied state.
5. Check Optimization checkbox, if you want to apply optimization. For detailed
description of Optimization, please refer to step 3 in the “Create Daily Schedule”
section.
6. Click OK button. From now on these settings will be the default settings when
creating a new switchpoint for a daily schedule.
Create Daily Schedule
1. In the Schedules tree, right-click on the Daily schedules folder of the room
control, you want to create a new daily schedule for.
2. Click Add. A new daily schedule, called ´DPDaily1` (´DPDaily2`, etc.) is created
in the tree. The daily schedule is blank, i.e. it has no switchpoints yet.