Filter
Top Products
USER GUIDE ARENA/ RANGER
67 EN2Z-0906GE51 R0708
In the datapoints list, you can do the following:
• Display certain datapoints by applying a filter as described under “Apply Filter for
Display” in the “Basic Functions” section.
• Enter an alias name for a datapoint.
Please refer to the “Enter Alias Name for Datapoint” section.
• Override the current datapoint value.
Please refer to the “Override Datapoint Value” section.
• View and change datapoints properties.
Please refer to the “View/Change Datapoint Properties” section.
• Show datapoints in manual override, see “Show Datapoints in Manual Override”
section.
• Print datapoints list.
Please refer to the “Print Datapoints List” section.
• Configure the list display per level (system, controller, plant, and segment).
Please refer to “List Display Configuration” in the “Basic Functions” section.
Show Datapoints List
1. In the tree, click the level (site, system, etc.) for which you want to display
datapoints.
2. On the right pane, click Datapoints tab.
The datapoints list is displayed. For description of the properties, please refer to
the “Overview” section.