Filter
Top Products
SDC / DHC Operation
EN2H-0221GE51 R0808 87
Para-
meter
Designation Setting range / Setting values Factory
setting
Setting
OFF No automatic exit 2 11 Automatic exit
time
0,5 ...
5 min
Automatic jump back to
the basic display occurs
after the set time
ON Anti-blocking protection
active
ON 12 Anti-blocking
protection
OFF Anti-blocking protection
not active
13 Logical fault
messages
OFF, ON OFF
14 Automatic set
function
OFF, ON OFF
15* Locking code for
heating technician
OFF, 0001 to 9999 1234
16* Type code Controller type corresponding to
type code table
Type
OFF Cycle temperature
disabled
ON 18 Cycle temperature
enable
ON Cycle temperatures
enabled
OFF Continuous frost
protection as per
parameter 05
OFF 19 Frost-protection
mode
0.5 to
60 min
Cyclic operation