Honeywell EN2H-0221GE51 R0808 Heating System User Manual


 
SDC / DHC Hydraulic Components
EN2H-0221GE51 R0808 203
Control mode 4 – Discharge control for heating circuit demand
System hydraulics
a
b
c
a Buffer tank c Hot-water tank
b Heat generator
As control mode 3, except that the demand from hot-water control
are sent directly to the heat generator.
An active hot-water priority only acts on the heating circuits when
there is no buffer discharge in progress.
See the table below for detailed correlations.
Control mode 5 – Loading control with hot-water switch-over valve
System hydraulics
a
b
a Heat generator b Buffer tank