Filter
Top Products
Hydraulic Components SDC / DHC
172 EN2H-0221GE51 R0808
Parameter settings for the switch-on optimisation in the HC,
MC-1 and MC-2 menu
Para
meter
Designation Setting range/Setting values Factory
setting
OFF Display of heat generator
temperature, room sensor off,
operation active
1 Display of room temperature, room
sensor active, operation active
2 Display of room temperature, room
sensor active, operation disabled
3 Room connection (in
conjunction with room
sensor)
3 Display of room temperature, room
sensor off, operation active
OFF
OFF
10 ...
500%
Influence active
4 Room factor
RC Room controller active
OFF
26 Room setpoint ramp OFF, 0.5 ... 60 K/h OFF
OFF
1 Adaptation off
2 Adaptation on
41 Switch-on
optimisation
3 Adaptation restart
OFF
42 Min. pre-heat time 0 ... set value of parameter 43 0,5
43 Max. pre-heat time Set value of parameter 42 to 30 h 5
44 Min. jump back
temperature
0 ... 30°C 5
45 Without room sensor 0 ... 10°C 1
46 Pre-heat time at 0°C 0 ... 30 h 1
47 Lowering ramp 0 ... 500 % 100