Filter
Top Products
Operation SDC / DHC
112 EN2H-0221GE51 R0808
Para-
meter
Designation Setting range / Setting values Factory
setting
Setting
06 Mixer motor 2 test STOP-OPEN-CLOS STOP
07 Storage charging
pump test
OFF-ON-OFF OFF
08 Variable output 1
test
OFF-ON-OFF OFF
09 Variable output 2
test
OFF-ON-OFF OFF
10 System Display of sensor value by
pressing the input button
–
5.4.16 "Error messages" menu (ALARM)
Error messages that occur are displayed in this menu. The fault
memory can hold max. 20 messages, which can be displayed
individually.
Para-
meter
Designation Setting range / Setting values Factory
setting
Setting
01 Error message 1 Last error message "Display"
02 Error message 2 Last error message but one "Display"
03 Error message 3 Last error message but two "Display"
04 Error message 4 Last error message but three "Display"
05 Error message 5 Last error message but four "Display"
...
20 Error message 20 First error message "Display"
21* Reset error
messages
SET by pressing the input button –
* OEM