Filter
Top Products
Control Functions SDC / DHC
114 EN2H-0221GE51 R0808
Para-
meter
Designation Setting range / Setting values Factory
setting
Setting
06 Collector flow
sensor
–5 ... +5 K 0
07 Buffer sensor of
collector
–5 ... +5 K 0
08 Sensor of variable
input 1
–5 ... +5 K 0
09 Sensor of variable
input 2
–5 ... +5 K 0
10 Sensor of variable
input 3
–5 ... +5 K 0
11 Room sensor SDW
10 of direct heating
circuit
–5 ... +5 K 0
12 Room sensor SDW
10 of mixed heating
circuit 1
–5 ... +5 K 0
13 Room sensor SDW
10 of mixed heating
circuit 2
–5 ... +5 K 0
6 Control Functions
6.1 Variable adjustment of the hydraulic parameters (variable
inputs and outputs)
The hydraulic presetting of the inputs and outputs of the controller
selected via the "Hydraulics" menu, Parameter 01 can be
adjusted individually. The preset hydraulics parameters can be
changed individually for this purpose.
Thus hydraulics not covered by the automatic preconfiguration
can also be implemented.
ATTENTION
The hydraulic parameters define the system. Changes can
have far-reaching effects on the way the controller works.
Parameter settings made elsewhere can be lost. Individual
adjustments must therefore be made very carefully!