Filter
Top Products
Menu Functions
Alarm Menu 5
5-25
avu034.jpg
Figure 5-33. Alarm
The A D buttons are used to select the menu option. The B C buttons are used to change
the parameter setting. Press the E button to save the new setting. Press the F button
to cancel any changes made and exit to the menu.
Alarm Setting
The ALARM SETTING function is used to enable or disable visible and audible alarm
notifications. The parameters are BEEP and DISPLAY.
When the BEEP parameter is ON, the thermo-hygrometer emits an audible beep during
an alarm condition. For the power alarm it is four short beeps every 20 seconds. For the
battery alarm it is three short beeps every minute.
For the sensor disconnect alarm it is two short beeps every measurement period. For
measurement alarms it is one long beep every measurement period. When the DISPLAY
parameter is ON, an alert message is displayed when an alarm condition occurs.
avu035.jpg
Figure 5-34. Alarm Setting
The A D buttons are used to select the menu option. The B C buttons are used to change
the parameter setting. Press the E button to save the new setting. Press the F button
to cancel any changes and exit to the menu.