Filter
Top Products
5020A
Users Manual
5-16
avu020.jpg
Figure 5-19. Data View, Begin Time
avu021.jpg
Figure 5-20. Data View, Numeric Format
The numeric mode displays the data in a numeric format. The BEGIN parameter specifies
the starting date and time of the data to display. Use the B C buttons to adjust the start
date and time. The format of the start date is according to D FORM in the SYSTEM,
DATE-TIME menu function. The format of the start time is 24 hour format.
Press the E button to display the data for the selected starting date and time. Use the A
D buttons to scroll through the data (you can go back two screens) and the B C buttons
to scroll among data blocks. Press the F button to cancel any changes and exit to the
menu.
The graphic mode displays the data in a graphic format. The CHAN parameter allows
you to select the channel from which to view the data. T CENT sets the center of the
vertical axis for temperature. T SCAL sets the scale. H CENT sets the center of the
vertical axes for humidity. H SCAL sets the scale. The TIME parameter is the length of
data to display and may be set to 1, 4, 10, or 24 hours, 2, 5, 7, 15, or 30 days. The DIVS
parameter is the number of divisions for the graph, and may be set to 1, 2, 4, 6, 8, or 10.
The BEGIN parameter sets the start date and the start time. The format of the start date is
according to the D FORM in the SYSTEM, DATE-TIME menu. The format of the start
time is 24 hour format.