Filter
Top Products
5020A
Users Manual
5-24
avu033.jpg
Figure 5-32. File View
To view a file select the file to open by using the A D buttons and press E. You may
choose between numeric and graphic format. To view data in numeric format, select
NUMERIC in the mode field using the A D buttons and press E. Use the du buttons
to scroll through the data (you can go back three screens) and the B C buttons to scroll
among data blocks.
To view data in graphic format, select GRAPHIC in the mode field using the A D
buttons and press E. The GRAPHIC mode displays the data in a graphic format. The
CHAN parameter allows you to select the channel from which to view the data. Use T
CENT, T SCAL, H CENT, and H SCAL to set the vertical axis center and scale for the
temperature and relative humidity graphs. The TIME parameter is the length of data to
display and may be set to 1, 4, 10, or 24 hours, 2, 5, 7, 15, or 30 days. The DIVS
parameter is the number of divisions for the graph, and may be set to 1, 2, 4, 6, 8, or 10.
The BEGIN parameter sets the start date and the start time. The format of the start date is
according to the D FORM in the SYSTEM, DATE-TIME menu. The format of the start
time is 24 hour format.
Alarm Menu
The ALARM menu allows the setting and viewing of alarms. The functions that appear
in this menu are ALARM SETTING, SENSOR ALARM, SYSTEM ALARM, and
ALARM VIEW. Alarm settings may be password protected.