Filter
Top Products
Menu Functions
Channel Menu 5
5-5
avu005.jpg
Figure 5-4. Channel Setting
Use the A D buttons to select the setting to change. The B C buttons are used to change
the setting parameters. Press the E button to save the new setting. Press the F button
to cancel any changes and exit to the menu.
Sensor ID
The SENSOR ID function allows each sensor to be uniquely identified. This may be
password-protected to prevent it from being changed. The model number and serial
number are displayed here but cannot be edited. The sensor ID cannot be set for a
channel without a sensor attached. The sensor ID is stored in the sensor, not in the
thermo-hygrometer.
avu006.jpg
Figure 5-5. Sensor ID
Use the B C and E buttons to select the sensor identification to change. The B C
buttons are used to move among character positions and the A D buttons are used to
change the character. Letters, numeric digits, space and underscore can be used. Press the
E button to save the setting. Press the Fbutton to cancel any changes and exit to the
menu.