Filter
Top Products
7-11
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario
Configuring Address Pools
For remote clients to gain access to your network, you must configure a pool of
IP addresses that can be assigned to remote VPN clients as they are successfully
connected. In this scenario, the pool is configured to use the range of IP addresses
209.165.201.1–209.166.201.20.
In Step 6 of the VPN Wizard, perform the following steps:
Step 1 Enter a pool name or choose a preconfigured pool from the drop-down list.
Alternatively, click New to create a new address pool.
The Add IP Pool dialog box appears.
Step 2 In the Add IP Pool dialog box:
a. Enter the Starting IP address and Ending IP address of the range.
b. (Optional) Enter the Netmask for the range of IP addresses.
c. Click OK to return to Step 6 of the VPN Wizard.