Filter
Top Products
4-7
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 4 Connecting Interface Cables
Connecting Cables to Interfaces
• SFP modules
–
Insert and slide the SFP module into the SFP port until you hear a click.
The click indicates that the SFP module is locked into the port.
–
Remove the optical port plugs from the installed SFP as shown in Figure 4-5.
Figure 4-5 Removing the Optical Port Plug
–
Connect the LC connector to the SFP module as shown in Figure 4-6.
1 Optical port plug 2 SFP module
143146
1
S
T
A
T
U
S
2