Filter
Top Products
7-5
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario
Configuring the FWSM for an IPsec Remote-Access VPN
To begin the process for configuring a remote-access VPN, perform the following
steps:
Step 1 In the main ASDM window, choose VPN Wizard from the Wizards drop-down
menu. The VPN Wizard Step 1 screen appears.
Step 2 In Step 1 of the VPN Wizard, perform the following steps:
a. Click the Remote Access VPN radio button.
b. From the drop-down list, choose Outside as the enabled interface for the
incoming VPN tunnels.
c. Click Next to continue.