Filter
Top Products
9-5
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 9 Configuring the AIP SSM
AIP SSM Configuration
Sessioning to the AIP SSM and Running Setup
After you have completed configuration of the ASA 5500 series adaptive security
appliance to divert traffic to the AIP SSM, session to the AIP SSM and run the
setup utility for initial configuration.
Note You can either session to the SSM from the adaptive security appliance (by using
the session 1 command) or you can connect directly to the SSM using SSH or
Telnet on its management interface. Alternatively, you can use ASDM.
To session to the AIP SSM from the adaptive adaptive security appliance, perform
the following steps:
Step 1 Enter the session 1 command to session from the ASA 5500 series adaptive
security appliance to the AIP SSM:
hostname# session 1
Opening command session with slot 1.
Connected to slot 1. Escape character sequence is 'CTRL-^X'.
Step 2 Enter the username and password. The default username and password are both
cisco:
Note The first time you log in to the AIP SSM you are prompted to change the
default password. Passwords must be at least eight characters long and not
a dictionary word.
login: cisco
Password:
Last login: Fri Sep 2 06:21:20 from xxx.xxx.xxx.xxx
***NOTICE***
This product contains cryptographic features and is subject to United
States
and local country laws governing import, export, transfer and use.
Delivery
of Cisco cryptographic products does not imply third-party authority
to import,
export, distribute or use encryption. Importers, exporters,
distributors and
users are responsible for compliance with U.S. and local country laws.
By using