Filter
Top Products
CHAPTER
11-1
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
11
Configuring the 4GE SSM for Fiber
The 4GE Security Services Module (SSM) has four Ethernet ports, and each port
has two media type options: SFP (Small Form-Factor Pluggable) fiber or RJ 35.
You can mix the copper and fiber ports using the same 4GE card.
Note The 4GE SSM requires ASA software release 7.04 or later.
This chapter includes the following sections:
• Cabling 4GE SSM Interfaces, page 11-2
• Setting the 4GE SSM Media Type for Fiber Interfaces (Optional), page 11-3
• What to Do Next, page 11-5
Note Because the default media type setting is Ethernet, you do not need to change the
media type setting for any Ethernet interfaces you use.