Filter
Top Products
Chapter 10 Configuring the CSC SSM
Scenario: Security Appliance with CSC SSM Deployed for Content Security
10-14
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Step 13 In Step 6 of the CSC Setup Wizard, review configuration settings you just entered
for the CSC SSM.
If you are satisfied with these settings, click Finish.
ASDM shows a message indicating that the CSC device is now active.
Divert Traffic to the CSC SSM for Content Scanning
The adaptive security appliance diverts packets to the CSC SSM after firewall
policies are applied but before the packets exit the egress interface. For example,
packets that are blocked by an access list are not forwarded to the CSC SSM.
Configure service policies to specify which traffic the adaptive security appliance
should divert to the CSC SSM. The CSC SSM can scan HTTP, POP3, FTP, and
SMTP traffic sent to the well-known ports for those protocols.