Filter
Top Products
11-3
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 11 Configuring the 4GE SSM for Fiber
Setting the 4GE SSM Media Type for Fiber Interfaces (Optional)
Figure 11-2 Connecting the LC Connector
e. Connect the other end of the LC connector to your network device.
After you have attached any SFP ports to your network devices, you must also
change the media type setting for each SFP interface. Continue with the following
procedure, “Setting the 4GE SSM Media Type for Fiber Interfaces (Optional).”
Setting the 4GE SSM Media Type for Fiber Interfaces
(Optional)
If you are using fiber interfaces, for each SFP interface you must change the
media type setting from the default setting (Ethernet) to Fiber Connector.
MGMT
USB2
Cisco SSM-4GE
LN
K
SPD
0
1
2
3
MGMT
USB2
USB1
P
O
W
ER
STATUS
1
143647
2
1 LC connector 2 SFP module