Filter
Top Products
Chapter 6 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
6-8
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
To configure a pool of IP addresses that can be used for network address
translation, perform the following steps:
Step 1 In the ASDM window, click the Configuration tool.
a. In the Features pane, click NAT.
The NAT Configuration screen appears.
b. In the right pane, click the Global Pools tab.
c. Click Add to create a new global pool for the DMZ interface.
The Add Global Address Pool dialog box appears.
Note For most configurations, IP pools are added to the less secure, or public,
interfaces.