Filter
Top Products
4-5
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 4 Connecting Interface Cables
Connecting Cables to Interfaces
c. Auxiliary port
–
Connect the serial console cable as shown in Figure 4-2. The console
cable has a DB-9 connector on one end for the serial port on your
computer, and the other end is an RJ-45 connector.
–
Connect the RJ-45 connector to the Auxiliary port (labeled AUX) on the
adaptive security appliance, as shown in Figure 4-3.
–
Connect the other end of the cable, the DB-9 connector, to the serial port
on your computer.
Figure 4-3 Connecting to the AUX Port
1 RJ-45 AUX port 2 RJ-45 to DB-9 console cable
92686
FLASH
CONSOLE
AUX
POWER
STATUS
FLASH
VPN
ACTIVE
2
1