2-35
Installation Guide for the Cisco Secure PIX Firewall Version 5.2
78-11180-01
Chapter 2 Installing a PIX Firewall
Software Installation Notes
The following is an example of the download screen display:
Rebooting....
PIX BIOS (4.0) #47: Sat May 8 10:09:47 PDT 2000
Platform PIX-520
Flash=AT29C040A @ 0x300
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Flash boot interrupted.
0: i8255X @ PCI(bus:0 dev:13 irq:11)
1: i8255X @ PCI(bus:0 dev:14 irq:10)
Using 1: i82558 @ PCI(bus:0 dev:14 irq:10), MAC: 0090.2722.f0b1
Use? for help.
monitor> ?
? this help message
address [addr] set IP address
file [name] set boot file name
gateway [addr] set IP gateway
help this help message
interface [num] select TFTP interface
ping <addr> send ICMP echo
reload halt and reload system
server [addr] set server IP address
tftp TFTP download
timeout TFTP timeout
trace toggle packet tracing
Use of the monitor command continues:
monitor> addr 192.168.1.1
address 192.168.1.1
monitor> serv 192.168.1.2
server 192.168.1.2
monitor> file pix521.bin
file pix521.bin
monitor> ping 192.168.1.2
Sending 5, 100-byte 0x5b8d ICMP Echoes to 192.168.1.2, timeout is 4 seconds:
!!!!!
Success rate is 100 percent (5/5)
monitor> tftp
tftp pix521.bin@192.168.1.2................................
Received 626688 bytes
PIX admin loader (3.0) #0: Tue May 11 10:43:02 PDT 2000
Flash=AT29C040A @ 0x300
Flash version n.n.n.n, Install version n.n.n
Installing to flash
...