Filter
Top Products
2-12
Installation Guide for the Cisco Secure PIX Firewall Version 5.2
78-11180-01
Chapter 2 Installing a PIX Firewall
Installing a PIX 525
Note If for any reason you may choose to downgrade to any software version, note that you need
to use the clear flashfs command before doing so. A new section has been added to Flash
memory that must be cleared before downgrading.
Installing a PIX 525
This section includes the following topics:
• Introduction
• PIX 525 Installation Steps
• Configuring the PIX 525
• PIX 525 Feature Licenses
Introduction
To download software to a PIX Firewall, see the “Software Installation Notes” section in this chapter
or refer to the Cisco PIX Firewall Configuration Guide, Version 5.2.
The PIX 525 is displayed in Figure 2-12.
Figure 2-12 PIX 525
The rear panel of the PIX 525 is shown in Figure 2-13.
Figure 2-13 PIX 525 Rear Panel View
There are two LEDs on the front panel of the PIX 525 (see Figure 2-14). The LEDs function as follows:
• POWER—On when the unit has power.
44009
CISCO SECURITY PIX 525
SERIES
FIREWALL
POWER
ACTIVE
44010
F
A
I
L
O
V
E
R
100M
bps A
CT
100M
bps A
CT
LIN
K
LIN
K
10/100 E
TH
E
R
N
E
T
1
10/100 E
TH
E
R
N
E
T
0
U
S
B
CO
NS
O
LE
P
IX-525