2000 Series | Program Entry Guide | 2.0 Phone EN | 9
Bosch Security Systems | 7/05 | 35114F
11 Cancel Route
Default:
Local
Selection:
Local, Phone 1 only, Phone 2 only,
Both
Local 0
Phone 1 only 1
Phone 2 only 2
Both 3
Reports: Cancel Reports
12 Sys Trbl Route
Default:
Local
Selection:
Local, Phone 1 only, Phone 2 only,
Both
Local 0
Phone 1 only 1
Phone 2 only 2
Both 3
Reports:
• RAM Access Fail Reports (unsuccessful attempt
to connect a remote programmer)
• Comm Fail Reports (Communication Failure
event) for Phone 1 and Phone 2
• Watchdog Reset Reports (system automatically
reset)
• Battery Missing Reports
• Battery Low Reports
• AC Fail Reports
• RF Receiver Trouble (Address 7, Address 8)
• RF Receiver Tamper (Address 7, Address 8)13
Sys Res Route
13 Sys Trbl Route
Default:
Local
Selection:
Local, Phone 1 only, Phone 2 only,
Both
Local 0
Phone 1 only 1
Phone 2 only 2
Both 3
Reports:
• RAM Access OK Reports (successful connection
to a remote programmer)
• Comm Restoral Reports (successful
communication after a Communication Failure
event)
• Re-Boot Reports (control panel reset with the
stand-by switch or a remote programmer
• Battery Restoral Reports (missing or low battery
restored)
• AC Restore Reports
• RF Receiver Trouble Restoral (Address 7,
Address 8)
• RF Receiver Tamper Restoral (Address 7,
Address 8)
14 Duress Route
Default:
Local
Selection:
Local, Phone 1 only, Phone 2 only,
Both
Local 0
Phone 1 only 1
Phone 2 only 2
Both 3
Reports:
• Duress Reports
• User Tamper (six attempts with bad passcode).