Filter
Top Products
2000 Series | Program Entry Guide | About This Manual EN | 2
Bosch Security Systems | 7/05 | 35114F
About This Manual
This guide describes the programming parameters
available to the 2000 Series Control Panels (except
D2012/D2012U). This guide follows the organization of
the D2212 Product Handler in the D5200 Programmer.
The table of contents lists each programming section,
program item, and its page number.
Throughout this manual, programming prompts are
shown in bold italic letters (such as
Phone 1
).
Use the Program Record Sheet (P/N: 35113) to record
your program entries. Installation instructions can be
found in the panel’s Installation Guide. The Keypad
Diagnostics Sheet provides specific diagnostic and testing
information. A Security System User Guide comes with the
keypad.
E Version Control Panels
The E versions of the 2000 Series Control Panels (for
example, the D2412UE) do not include point
expansion. They are limited to the on-board points.
Any programming for point expanders does not apply
to E version control panels.
Using this Guide for Keypad
Programming
Keypad programming requires a text keypad. For an
explanation, refer to Section 18.0 Keypad Programming of
this manual.
Display text and keypad programming appear as
shown:
0000
0 to 9, B to F
Default entries and selections for keypad programming
also appear in shaded boxes.